Skip to content

OpenQuok Edge extension

Install the OpenQuok extension on Microsoft Edge from Edge Add-ons. Same side panel, Skool connect, directory autofill, and context-menu drafts as Chrome.

8 min read

Connect your agent today

Draft from chat, review in your calendar, and publish only what you approve.

Start your free trial

Overview

The OpenQuok extension on Microsoft Edge helps when a network needs the browser — not only dashboard OAuth or pasted keys. Edge runs the same Chromium MV3 build as Google Chrome (extension/dist/). For a short product tour, see the browser extension page.

On Edge, install the published extension from Microsoft Edge Add-ons. Self-host operators load the same extension/dist/ folder unpacked in Edge — see Self-host (Edge build).

See it in action:

UseWhat the extension does
Social schedulingOpen the side panel → Social. Sign in with your dashboard. Pick channels and schedule or draft posts. OpenQuok publishes from the server. Connect channels required in the dashboard with Add Channel.
SkoolWhen you connect Skool in Add Channel, the extension reads cookies from skool.com while you stay signed in there. OpenQuok checks the session and stores it encrypted.
Directory launchSide panel → Directory: sign in, pick a directory channel chip to open that site and load your product profile, then Fill on the directory tab (on-page panel or side panel). Or start from My Products with Launch to directory. You submit on the directory site yourself.

On directory sites, users are required to sign in to OpenQuok.

Add Directory Channel in Channels Tab

Click Go to Login to open sign in on the same host as your dashboard (including self-host) or the directory login page. See Directory submission for My Products → launch steps.

Install on Microsoft Edge

Install OpenQuok from Edge Add-ons:

Microsoft Edge Add-ons

After install, pin the toolbar icon and open the side panel to sign in.

Side panel (Social and Directory)

Click the OpenQuok toolbar icon to open the Edge side panel. You can also open it from the context menu (see below) — that opens the Social tab.

Dashboard sign-in appears once in a session bar above the Social and Directory tabs (OpenQuok.com, self-host URL, refresh, disconnect). Switch tabs without signing in again.

TabPurpose
SocialAfter you connect in the session bar, pick channels, write a post, attach media, preview, and choose Publish now, Schedule, or Draft. Keep a signed-in dashboard tab open. Use web UI for the full feature (media library, AI tools, large uploads).
DirectorySee profile status and run Fill for directory destinations on the active tab when the session bar shows you are signed in.

Composer media (Social tab)

Use the toolbar + to attach images or video. Thumbnails show on your device until you publish, schedule, or draft — then the extension uploads to POST /api/v1/media/upload and creates the post. Remove a file with × on its thumbnail.

OpenQuok Chrome Extension's Social Tab

LimitValue
Attachments per postUp to 10
Single image (client check)About 30 MB
Single video (client check)Up to 1 GB

Channel selection

Channels appear as avatars above the post field. Use Select all or Select grouped channels for a workspace group. Tap a chip to include or exclude a channel. The + chip opens Add Channel on My Dashboard (or focuses an open account tab).

Context menu

Right-click on any page:

Menu itemWhen it appearsDraft
Schedule with OpenQuokSelected textBody = selection
Schedule with OpenQuokPage backgroundBody = page title + URL
Schedule with OpenQuokImageUploads the image when possible. If upload fails, the URL goes in the body with a warning
Humanize selection with OpenQuokSelected textOpens /tools/humanizer in a new tab with the selection in the composer (up to about 2,200 characters). The side panel stays closed.

Right click to see OpenQuok in Context Menu

For Schedule with OpenQuok, the extension saves the draft, opens the side panel on Social, and focuses the composer. Humanize selection with OpenQuok opens the Humanizer tab with your selection in the composer; the side panel stays closed. The tab uses your active dashboard host when you are on one, otherwise an open localhost:5173 tab, otherwise the host where the extension session is signed in.

Who needs this

AudienceAction
Social schedulingInstall the extension in Edge, open Social, sign in, and schedule to channels you connected in the dashboard.
SkoolInstall in Edge, stay signed in on Skool, then use Add Channel in the dashboard.
Directory launchInstall the extension, complete a product profile on My Products, then launch to PeerPush, Uneed, or another supported directory. See Directory submission.
Self-host operatorsBuild extension/dist/, load unpacked at edge://extensions, set VITE_OPENQUOK_BROWSER_EXTENSION_IDS with edge:<crx-id>, and add your dashboard HTTPS URL to the manifest. See Extension (Edge).

Environment variables (web)

The dashboard talks to the Edge install with chrome.runtime.sendMessage (same Chromium bridge as Chrome). Set extension IDs on the web app:

VariablePurpose
VITE_OPENQUOK_BROWSER_EXTENSION_IDSRecommended when you ship Chrome and Edge. Include chromium:<id> and edge:<crx-id>. Copy the Edge CRX ID from edge://extensions → extension Details.
VITE_OPENQUOK_BROWSER_EXTENSION_IDLegacy single ID. Use only when Edge is the sole Chromium listing users run.

Copy from web/.env.development.example into web/.env.development.local. Restart the dev server after you change it.

Self-host (Edge build)

Operators who build from source: load unpacked from extension/dist/ at edge://extensions, copy the CRX ID into VITE_OPENQUOK_BROWSER_EXTENSION_IDS, and patch externally_connectable.matches for custom dashboard hosts. Full steps live in Extension (Edge) under Configuration - Web.

Manual verification checklist for self-host

Use this after you build or update the extension from source. Use an Edge profile where you are signed in to OpenQuok with at least two social channels.

Checklist for Social Tab

Session and channels

Connect in the session bar above the tabs — the Social tab shows the composer and the connection label stays visible when you switch to Directory (no duplicate sign-in banner). Select all or Select grouped channels. Tap + — it opens Add Channel on the account page. Schedule a post. Optional: right-click text → Schedule with OpenQuok — text appears in the composer.

Media and preview

Attach a media. Remove one with ×. Try an oversized file — error before upload. Draft or schedule with media only (empty caption) — post has media on the dashboard. Right-click an image → Schedule with OpenQuok — preview or URL fallback behaves as expected. Confirm Preview updates; one channel vs many changes preview style. Open full composer still opens the dashboard editor.

Checklist for Directory Tab

Panel and Fill

Switch to Directory — text and buttons are readable on the panel theme. Smoke one Fill on PeerPush or Uneed when you use directory launch.

Directory avatar

Tap a directory avatar — the Fill panel opens on the directory tab when you are signed in with a product profile.

Search documentation
Find a docs page
Discord Support